Dawno już miałem wstawić poniższy cytat kreslący ciekawy pomysł na używanie broni CP w scenariuszu "Long Term SHTF" i braku kapiszonów, a przy założeniu dostępu do czarnego prochu lub możliwości jego wytworzenia. Oczywiście przy obecnym stanie prawnym w PL taka modyfikacja jest nielegalna (przez niezgodność historyczną). Nic jednak nie stoi na przeszkodzie, żeby zaplanować dokładnie taką przeróbkę na czasy post/apokaliptyczne, zgromadzić potrzebne do niej narzędzia i materiały. Można też dokonać wstępnego lutowania obwodów. No, ale do sedna:puchalsw pisze:Ja wybrałbym strzelbę czarnoprochową z zamkiem skałkowym (nie potrzeba kapiszonów), i wymieniony przez Ciebie rewolwer (niestety bez kapiszonów się nie da)
Do tego zestaw do odlewania kul, młynek do prochu, no i zapas saletry, siarki i wungla drzewnego
[quote="Lloyd Tackitt w książce "A Distant Eden: Eden's Hammer""]They arrived at Matthew’s blacksmith shop and entered. Matthew was holding a sawed-off over-under shotgun that had been modified with a slide action from a pump shotgun.
(...)
Adrian asked Matt, “What’s that rig you were holding? Never saw an over under shotgun with a pump on it before.”
“It’s my newest invention. I just got it perfected, and I’m ready to give it a field trial. It’s a wild boar gun. You know how hard those pigs are to kill? Well, this little beauty will stop them dead in their tracks. It’s black powder and shoots a .779 caliber bullet that weighs a ton. It’s a sabot round. The slug is bimetallic with a hardened iron center made of three flechettes surrounded by soft lead, giving it both deep penetration and wide expansion. “
(...)
“It’s fast loading because it’s a breach loader—the rounds are placed in and the powder inserted behind it after breaking it open. The black power is a pre-measured quantity wrapped in wax paper. Once the powder is inserted, you tear a small hole in the end to expose the powder to the sparking device. I have a small piece of sharpened steel on a chain attached to the side of the action for tearing the paper. The paper-wrapped charge is sort of like the ones used during the Civil War, but loaded from the other end. This baby is fast loading, no ramrods, and extremely reliable. I went black powder because I’ve learned how to make it and it’s renewable, as they used to say. Saves those precious tailor-made factory loads for more important things, and it will bring even more trade in for black powder and bullets.”
(...)
“The pump is actually an electric generator. Remember those old shake‘em flashlights? Like that. The electric charge goes into two capacitors buried in the stock. I made the capacitors with foil and cardboard and wire. Then I covered the capacitors in melted plastic so they’re watertight.
They should last for decades. Pump the slide action to charge the capacitors, one capacitor for each barrel. There’s a switch to alternate the charging path for each barrel. When you pull one of the triggers, it releases the capacitor charge into a little sparking device I replaced the firing pin with, and boom! That big old heavy slug will go right through the thickest gristle of the biggest boar and penetrate deep, taking out their innards, making a big hole in the pig. Big hole, deep penetration, acres of internal damage, and ol pig drops in its tracks. I think I can convert one shotgun a week. It should be a good trade item.”
Adrian asked, “Why the electric stuff?”
“Because I can’t make mercury fulminate caps. This way, I don’t need to. This has a tremendously faster lock time, too—almost instantaneous.”
Adrian asked, “Shot it yet?
“Many times. Works great on the range now I’m going hunting and try it in the field. I shot it into a couple of pig carcasses to see how the round would penetrate and develop. It worked great, blew a hole all the way through. As the lead part expands, the steel flechettes keep going, but on diverging paths. I aided this by making the slug a hollow point, with the hole in the tip ending at the points of the steel flechettes. The holes coming out of the pig were from the flechettes—those babies do travel. The lead all stayed inside, blowing up everything in the chest cavity. I shot it at various distances, and it has a rainbow trajectory. It’s not a long-range gun. Shoot it over fifty yards, and you have to really start elevating the barrel. I was hoping for some rain so I could try it out wet, but it should work just fine. I want to put it to the real test before I trade any off, so I’m going to douse it with water and shoot it on the range again and then go hunting.”[/quote]
W polskim skrócie:
Pomysł zakłada przerobienie strzelby na zapłon elektryczny. Prąd pochodzić miałby z prądnicy napędzanej "pompką", jak w typowym shotgunie z magazynkiem rurowym, choć można użyć do tego systemów korbkowego czy ściskowego, pochodzących np. z latarek albo radioodbiorników. Wytworzony ładunek elektryczny miałby być przechowywany na kondensatorach z drutu, folii i kartonu zalanych roztopionym plastikiem dla uodpornienia na wilgoć (po jednym na lufę, bo czemużby nie użyć dwururki

Jak dla mnie pomysł przeuroczy i bardzo zgrabny. Teoretycznie takie rozwiązanie powinno być długowieczne, niezawodne, a strzał powinien odbywać się natychmiastowo po naciśnięciu spustu. Jestem też pewien, że dałoby się ten pomysł zaadaptować do rewolweru, choć byłaby to o wiele bardziej skomplikowana modyfikacja.
Tutaj linki do opisu eksperymentów z wykonaniem elektrycznego urządzenia zapłonowego:
http://www.ctmuzzleloaders.com/ctml_exp ... ition.html
http://www.ctmuzzleloaders.com/ctml_exp ... ricml.html
(wychodzi na to, że najlepiej użyć kondensatora z lampy błyskowej aparatu fotograficznego)
Ty, Puchalu, zapewne czytałeś tę książkę ;] (Wszystkim innym polecam tę serię). Nie wiem, czy zauważyłeś, ale właśnie ukazała się "The Remaining: Fractured" autorstwa D.J Molles.

P.S.
Ciekawe, czy dostanę złotą szufelkę?
